How to Clean a Grill that Caught Fire & 5 Easy Steps to Clean that Grill!

We’ve all been there: you’re grilling some burgers, and suddenly a flare-up happens. Before you know it, your grill is on fire.

It’s easy to panic when this happens, but there’s no need to worry—your grill can be cleaned up and good as new in no time! Let us know how to clean a grill that caught fire.

How to clean a grill that caught fire?

Step 1. Turn off the gas

Turn off the gas to your grill or stove by turning the knob to “OFF” or “PILOT.” If you’re not sure how, check your owner’s manual for instructions.

Step 2. Remove the food from the grill

If any food is still on your grill, remove it and put it in a covered container until you’re ready to eat it. Don’t put it back on if there’s still smoke coming out of it!

Step 3. Remove dirt and debris

The next step is to clean off all dirt and debris from inside your appliance before turning it back on again.

To do this, first wipe down all surfaces with a damp cloth or sponge (do not use soap), then dry them thoroughly with another clean towel or rag before proceeding to Step 4 below!

Step 4. Scrub Thoroughly

Now that you’ve gotten rid of all unwanted particles inside your grill, let’s scrub it down good so that nothing else will stick around later when we turn the gas back on!

You can scrub using an old toothbrush or small scrub brush that’s been dipped into dish soap water first (don’t use anything else like bleach because it could leave behind residue which could be hard to remove).

Step 5: Turn the gas on

Once you’ve done this, scrub your grill thoroughly with soap and water before turning the gas back on. You may want to wear gloves during this step so you don’t burn yourself by accident!

Also Read: How to clean a grill mat in 7 easy steps?

How to clean a grill that caught fire using vinegar?

clean grill with vinegar
clean grill with vinegar

The most important thing to remember when cleaning your grill is to never use water on a hot grill. This can cause the food to stick to the grates and make it more difficult for you to clean up after yourself.

If your grill has recently caught fire, here’s how you can clean up the mess:

  • Remove all of the food from the grill and set it aside on a plate or tray. Make sure that all of the food is cool before doing this; otherwise, you risk burning yourself or setting off another fire.
  • Take out any paper towels or napkins that were used to douse the flames with water or vinegar while they were still hot and dispose of them in a trash bag with other waste materials from the grill cleaning process. Don’t forget about any old newspapers or magazines lying around either!
  • Use an abrasive brush with stiff bristles like steel wool to scrub off burnt food residue from your grill’s cooking surface.

How can wet rags be used to clean a grill that caught fire?

It’s not a fun experience to have your grill catch on fire, but with the right tools and some know-how, you can clean up after it and get cooking again in no time.

  • Remove any food from inside the grill. If there are any food items still on the grill, remove them immediately. If some of them have burned and are stuck to the grill, use tongs or pliers to remove them from the surface.
  • Soak a rag with water and place it on top of the fire to smother it out. This is much safer than using a fire extinguisher since you don’t want chemicals inside your grill (or lungs). If possible, cover the entire grill with wet rags until all flames have been extinguished.
  • Wait 10 minutes before lifting off any wet rags covering your grill; this will allow all remaining flames to burn out completely before removing any wet rags covering your grill.

How can baking soda be used to clean a grill that caught fire?

If your grill catches fire, use baking soda to put it out. Steps to clean a grill that caught fire using baking soda:

  • Turn off the gas or charcoal and let it cool down.
  • Remove any food from the grill and clean up all debris.
  • Clean the grates, cooking grate, and drip pan with warm water and soap.

If necessary, soak the grates in warm water for 10 minutes before you scrub them clean with a sponge or brush. Clean the cooking grate by scraping off any charred bits with a spatula, then wash it with warm soapy water.

Clean the drip pan by dumping out any ash and debris, then scrub it thoroughly with warm soapy water and rinse well before reusing it.

Sprinkle baking soda over the hot coals (if applicable) to extinguish them and then sweep it up or vacuum it up after they cool completely so that you don’t risk starting another fire on your next cookout!

Also Read: How much clearance does a grill need?

How to prevent the grill from catching fire?

how to prevent grill from catching fire
how to prevent grill from catching fire

The grill is an essential part of your backyard, and it is the one thing that will make your cookout extra special.

The only problem with grilling is that it can sometimes catch fire. If you’re not careful, you might not be able to control the flames, and it could destroy your whole barbecue.

Here are some tips for preventing the grill from catching fire:

  • Never leave a lit charcoal or gas grill unattended.
  • Never use flammable liquids to start a propane or natural gas grill; instead use lighter fluid or pressurized starter fluid that contains no flammable liquids or vapors.
  • Keep children away from the barbecue area, especially when cooking with charcoal or when using lighter fluid near an open flame. Never allow children to play around or on top of a hot grill/barbecue/burner unit; they may get burned on exposed heating elements or hot surfaces, as well as touching hot cooking utensils such as spatulas and forks while they’re still holding food being prepared on the grill/barbecue/burner unit.
  • Never add fuel to a hot burner cylinder assembly; wait until all heat has dissipated before refueling.


Can we use a grill that has previously caught fire?

Yes, you can absolutely use a grill after it catches fire.

It’s important to know that grill fires are common and totally normal. They happen to the best of us—even grilling superstars like Bobby Flay and Guy Fieri have been known to accidentally set their grills ablaze.

Can you put water on a grill fire?

Nope. The reason for this is simple: water will not actually put out the fire; instead, it will only spread the flames more.

Water has a very high specific heat and latent heat of vaporization—which means that when it comes into contact with an already-burning flame, it absorbs energy and turns into steam, which then gets shot up into the air like a geyser, making things worse in terms of size and strength of the fire!

How do you stop a charcoal grill fire?

The best way to stop a charcoal grill fire is to use a fire extinguisher. If you don’t have one handy, or if it’s too late for that, you can put the fire out by drowning it in water.

When you do this, be careful not to splash yourself with water or get any on your food. It will ruin the taste and texture of whatever is cooking on the grill!

You can also try smothering the blaze with dirt or sand, but this isn’t recommended unless you have nothing else at hand.


There are many ways to clean a grill that caught fire, however the aforementioned tips will get you up grilling again faster.

You should also be extremely cautious when grilling and always keep an eye on the grill when it is on. Now, that you have learnt how to clean a grill that caught fire, share this post with your friends and family.